LeoBodner® Radiant (2026) – 15 millimeters

Low temperature underfloor heating, minimal thickness, 15 millimeters, radiant, low thermal inertia, cooling

Dry screed construction system 2026

Dry screed 2026

Riscaldamento a pavimento a bassa temperatura, minimo spessore, radiante, bassa inerzia termica, raffrescamento

Massetto a secco sistema di costruzioni a secco 2026

Sottofondi a secco 2026

ClimateHouse, green building, green architecture dry systems and dry buildings require increasingly sophisticated green building radiant panel heating systems, where minimal thickness, rapid adjustment and low temperature are the main actors.

Features
LeoBodner® Radiant 15 does not work with thermal inertia (heat accumulation) but with thermal conductivity (immediate heat transmission), which allows considerable energy savings. The system does not have to heat the entire screed, which then releases the heat, but only 15 mm below the floor.
For example: to be warm at 7 am, the system will start up only 20 minutes earlier, while in traditional systems it will start up at least 3 hours earlier. This low-temperature radiant heating is also ideal for heat pumps or solar thermal.
In summer cooling, with our dry construction system, which is directly in contact with the floor, the inevitable condensation is only superficial and evaporates immediately or is absorbed immediately by the dehumidifier (which must be installed). In contrast, in conventional systems, inevitable condensation often also forms inside the screed and struggles to dry.

– REQUIRES ONLY 15mm THICKNESS – LOW THICKNESS SLAB
– The floor is laid directly on the radiant panels
– Very light and load resistant
– ideal for subfloors/bridges and dry laid floors
– Low thermal mass for very fast adjustments
– Works particularly well in cooling, avoiding condensation
– Energy saving, green building
– Ecological, the panels are based on gypsum and cellulose fibre

The system is supplied complete with panels, pipes and curve supports, but we can also supply manifolds, valves, electronics, thermostats and thermometers ready for connection to the boiler.
Thanks to the minimal thickness of the panels (15 mm) and the low specific weight (18 kg/sqm), the system is particularly suitable for renovation and installation on existing floors, for prefabricated wooden houses and houses built with dry construction systems.

(2026) DRY SCREED FOR UNDERFLOOR HEATING AND COOLING

(2026) DRY SCREED FOR UNDERFLOOR HEATING AND COOLING LAID ON EXISTING FLOOR